Share:
Specifications
Dimensions of the tip attached to the soldering iron:
Other dimensions:
HOW TO TAKE CARE OF THE GROT
The tips of the YATO soldering irons are covered with a material that reduces the oxidation of the tip. Prolonged heating and mechanical damage gradually degrade the protective layer, then the tip quickly oxidizes, which results in problems with melting the solder. Instead of melting and sticking to the tip, the tin balls up and falls off. A proven way to take care of the tip is to tin it. When heating up the soldering iron for the first time, put a little tin on the tip of the soldering iron and remove its excess, e.g. with brass shavings. The resulting layer of tin protects against oxidation. It is a good practice to tin the tip each time after finishing work.
CAUTION
Soldering irons powered directly from the mains socket should have a plug with a grounding pin and should be powered from a socket with an earth connection. Failure to ground the metal housing of the heater is a risk of electric shock, which in the best case will end in burns. All Yato soldering irons have a plug with grounding, which is connected to the metal housing of the heater.
- Weight (kg) 0.3750
- Master Carton MC 16
- Pal 448
- Power [W] 80
- Power supply: 230V
- Heater power: 80W
- Depth of the tip hole: about 60 mm
- Tip diameter: 7.0 mm
Dimensions of the tip attached to the soldering iron:
- Length: about 95mm
- Diameter: 6.7mm
- Tip diameter: 1.5 mm
Other dimensions:
- Total length with bent cable: 290 mm
- Handle length: about 130 mm
- Length of the power cord: 140 cm
- The soldering iron needs 2 to 3 minutes to heat up to 350°C.
HOW TO TAKE CARE OF THE GROT
The tips of the YATO soldering irons are covered with a material that reduces the oxidation of the tip. Prolonged heating and mechanical damage gradually degrade the protective layer, then the tip quickly oxidizes, which results in problems with melting the solder. Instead of melting and sticking to the tip, the tin balls up and falls off. A proven way to take care of the tip is to tin it. When heating up the soldering iron for the first time, put a little tin on the tip of the soldering iron and remove its excess, e.g. with brass shavings. The resulting layer of tin protects against oxidation. It is a good practice to tin the tip each time after finishing work.
CAUTION
Soldering irons powered directly from the mains socket should have a plug with a grounding pin and should be powered from a socket with an earth connection. Failure to ground the metal housing of the heater is a risk of electric shock, which in the best case will end in burns. All Yato soldering irons have a plug with grounding, which is connected to the metal housing of the heater.
Inquiry - YATO Soldering Gun 80 W / Model: YT-8273
