Share:
SNAP-ON 20 A Plasma Arc Cutting Machine / Model: PLASMA20i
Contact Us
Category: Standard - Duty Plasma Cutter
Quantity:
| Air Supply Required | 50 PSI @ 5 CFM |
| Shipping Weight, lb | 25 |
| Warranty* | 2 Years |
| Output Current, amps | 5–20 |
| Frequency, Hertz | 50/60 |
| Voltage, VAC | 120 |
| Country Of Origin | ITA |
| Sever Thickness, inches | 3/8 |
| Primary Input, volts | 115 V AC, 50/60 Hz |
| Ground Cable Length, feet (m) | 12 (3.7) |
| Cut Thickness, inches | 1/4 |
| Duty Cycle/Rated Output at 100%, amps | 15 |
| Net Weight, lb (kg) | 22 (10) |
| Weight: Base Unit, lb | 22 |
| Output Control, amps (adjustable) | 5–20 |
| Power Input Cord, feet | 8 |
| Primary Input, amps | 20 |
| Input Current, amps | 20 |
| Phase Type | Single |
| Torch Cable Length, feet (m) | 12 (3.7) |
| Duty Cycle Rating | 100% @ 15 A |
Features
- Perfect for the shop or on the jobsite, it features a small-yet-powerful package size that allows for portability in a variety of situations
- Ideal for cutting a variety of ferrous, non-ferrous and high-strength materials
- Cuts a maximum of 1/4'' and will sever up to 3/8''
- Adjustable amperage range from 5-20 A provides the ability to minimize distortion on thinner materials
- For applications such as panel removal around spot welds—adjusts cut depth to the top layer of material without disturbing the base layer
- Accepts 115 V input power supply voltage at minimum current requirements
- Contains an air filter and pressure regulator to allow for either a compressed air or nitrogen air supply
- Technical support and service: 800-ABC-WELD
Inquiry - SNAP-ON 20 A Plasma Arc Cutting Machine / Model: PLASMA20i