Share:
SNAP-ON Synergic Double-Pulse Inverter MIG Welder / Model: MIG200i
Contact Us
Category: Synergic MIG Welders
Quantity:
| Machine Weight, lb (kg) | 46 (21) |
| Power Input, V AC | 230 |
| Depth, inches (mm) | 19 (482) |
| Power Input Cord Length, feet (meters) | 9 (2.7) |
| Width, inches (mm) | 11 (280) |
| Country Of Origin | ITA |
| Standard Torch Configuration | Aluminum |
| Duty Cycle/Rated Output, amps | 120@100% |
| Ground Cable Length, feet (m) | 10 (3) |
| Height, inches (mm) | 16 (406) |
| Shipping Weight, lb (kg) | 50 (23) |
| Power Output, amps | 20–200 |
| Input Current, amps | 26 |
| Power input, Hz (Single Phase) | 50/60 |
Features
- Inverter-style wire feed synergic double-pulse MIG welder with standard aluminum torch
- Pulse and double-pulse settings for increased heat control with thin materials and improved overall weld appearance
- Easy-to-read LCD display panel and a single knob for selection and adjustments
- Multiple synergic curves allow the user to weld a variety of materials and thicknesses
- Preset synergic curves automatically provide the most optimal parameters for individual situations
- Individual welding parameters and preset by material, thickness, wire type and size along with shielding gas type
- LCD screen shows welding parameters such as current, voltage, recommended thickness, wire speed and wire diameter
- Machine automatically sets both heat and wire speed for multiple material thicknesses
- Welds 5354, 4047 and 0.045 5554 aluminum with standard 10 foot torch
- MIG welding of steel, stainless steel and MIG brazing of high-strength and Boron steels with optional steel torch
- Selectable start mode includes a trigger control for Start Current, Slope Time and Crater Fill options
- Hot start option increases current at the beginning of the weld cycle to ensure adequate penetration
- Slope time adjustment controls the amount of time full current is present between Hot Start and Crater Fill options
- Crater fill selection allows user to finish the weld cycle by filling in the weld puddle and eliminates pinholes
- Adjustable Arc Length, Inductance, Burnback, Soft Start, Pre Gas and Post Gas
- Spot weld and pause features with adjustable on time
- Complete with regulator-flowmeter
- Faster set up time and reduced production times
- Comes standard with aluminum torch
- Library of preprogrammed settings allows for welding a variety of materials and thicknesses
- Inverter-style wire feed welders automatically provide the user with the most optimal parameters for every situation
- Automatically sets voltage, current and wire speed for multiple material thicknesses
Inquiry - SNAP-ON Synergic Double-Pulse Inverter MIG Welder / Model: MIG200i
