Share:
SNAP-ON 135 A Portable MIG Welder / Model: MIG135
Contact Us
Category: SNAP-ON 115 Volt MIG Welders
Quantity:
| Wire Size, inches (mm) | .023–.035 (.58–.89) |
| Spot Weld Time (sec) | N/A |
| Shipping Weight, lb | 71 |
| Dimensions, inches (W x D x H) | 13 x 19 x 18-1/4 |
| Warranty* | 2 Years |
| Voltage Settings, MIG/TIG | 7/— |
| Spool Gun Ready | No |
| Spot-Stitch-Gas Purge | No |
| Welding Capacity, inches | 3/16 |
| Country Of Origin | ITA |
| Arc Voltage, V DC | 15–18.3 |
| Input Voltage | 115 V AC, 50/60 Hz 1-hp |
| Ground Cable Length, feet (m) | 8 (2.4) |
| Welding Capacity, Single Pass, inches | 3/16 |
| Weight, lb | 67 |
| Detatchable Feeder | No |
| Spot-Stitch | No |
| Gas Regulator-Flowmeter | Regulator |
| Wire Speed, in/min | 50/500 |
| Power Input Cable Length, feet (m) | 6 (1.8) |
| Remote Feeder Input Voltage (VAC) | N/A |
| Open Circuit Voltage, V DC | 16–24 |
| Output Amperage Max, amps | 135 |
| Torch Length, feet | 9 |
| Input Amperage (recommended) | 20 |
| Torch Neck Angle | 60° |
| Feeder Cable Length, feet | N/A |
| Duty Cycle Rating | 20% @ 90 A |
| Welding Current Range (amps) | 30–135 |
Features
- 135 A wire feed MIG welder welds up to 3/16'' in a single pass
- Uses seven heat settings to weld from 24 gage to 3/16'' thick steel
- Variable wire speed control
- Compact and portable for use on the worksite
- Capable of welding with .023-.035'' wire, as well as .035'' flux-core, gasless wire
- MIG torch is 9' in length
- Compact and portable for use on the worksite
Inquiry - SNAP-ON 135 A Portable MIG Welder / Model: MIG135
