Share:
SNAP-ON 140 A Muscle MIG Wire Feed Welder / Model: MM140SL
Contact Us
Category: SNAP-ON 115 Volt MIG Welders
Quantity:
| Wire Size, inches (mm) | .023–.045 (.58–1.1) |
| Spot Weld Time (sec) | 0–3 |
| Shipping Weight, lb | 219 |
| Dimensions, inches (W x D x H) | 14-1/2 x 26.3 x 32.3 |
| Warranty* | 2 Years |
| Voltage Settings, MIG/TIG | 8/4 |
| Spool Gun Ready | Yes |
| Welding Capacity, inches | 1/4 |
| Country Of Origin | USA |
| Arc Voltage, V DC | 14–26 |
| Input Voltage | 115 V AC, 50/60 Hz 1-ph |
| Machine Weight, lb | 155 |
| Ground Cable Length, feet (m) | 15 (4.6) |
| Welding Capacity, Single Pass, inches | 1/4 |
| Detatchable Feeder | Yes |
| Spot-Stitch | Yes |
| Gas Regulator-Flowmeter | Yes |
| Wire Speed, in/min | 50/800 |
| Power Input Cable Length, feet (m) | 20 (6) |
| Remote Feeder Input Voltage (VAC) | 28 |
| Open Circuit Voltage, V DC | 18–33 |
| Output Amperage Max, amps | 140 |
| Torch Length, feet | 10 |
| Input Amperage (recommended) | 30 |
| Torch Neck Angle | 60° |
| Feeder Cable Length, feet (m) | 15 (4.6) |
| Duty Cycle Rating | 100% @ 140 A |
| Welding Current Range (amps) | 30–140 |
What's Included
Includes cylinder rack, MIG torch with 10' cable, 15' feeder cable and 20' power input cable
Includes voltmeter to indicate OC V or arc voltage
Features
- Snap-on® MIG Welders have higher-duty cycles at maximum amperage, providing added weld times and performance that surpasses the competition
- Welds up to 1/4'' in a single pass
- Used in applications where voltage input is limited to 120 V
- Two-year warranty (except MIG torch and consumables)
- Exact voltage settings for precise heat control and ease of use
- Ability to add a Spool Gun for aluminum welding or TIG Accessory Pack for ferrous metals
- Wire feed assembly is constructed of precision machined cast aluminum and features all-metal gearing and 800 inch/minute delivery for consistent wire speeds
- Capacitor bank and diode set delivers consistent voltage and industry-leading smooth-arc characteristics
- All copper-wound transformer features Nomex® insulation and bolted laminations provide precise voltage control and repeatable welds
- Technical Support: 1-800-ABC-WELD
Inquiry - SNAP-ON 140 A Muscle MIG Wire Feed Welder / Model: MM140SL
