Share:
SNAP-ON 270 A Muscle MIG Wire Feed Welder / Model: MM250SL
Contact Us
Category: SNAP-ON 230V MIG Welders
Quantity:
| Wire Size, inches (mm) | .023–.045 (.58–1.1) |
| Spot Weld Time (sec) | 0–3 |
| Shipping Weight, lb | 244 |
| Dimensions, inches (W x D x H) | 14-1/2 x 34-1/2 x 35.8 |
| Warranty* | 2 Years |
| Voltage Settings, MIG/TIG | 8/4 |
| Spool Gun Ready | Yes |
| Country Of Origin | USA |
| Arc Voltage, V DC | 14–28 |
| Input Voltage | 208/230 V AC, 50/60 Hz 1-ph |
| Machine Weight, lb | 211 |
| Ground Cable Length, feet (m) | 15 (4.6) |
| Welding Capacity, Single Pass, inches | 3/8 |
| Detatchable Feeder | Yes |
| Spot-Stitch | Yes |
| Gas Regulator-Flowmeter | Yes |
| Wire Speed, in/min | 50/800 |
| Power Input Cable Length, feet (m) | 20 (6) |
| Open Circuit Voltage, V DC | 14–42 |
| Output Amperage Max, amps | 270 |
| Torch Length, feet | 10 |
| Input Amperage (recommended) | 33/30 |
| Torch Neck Angle | 60° |
| Feeder Cable Length, feet (m) | 15 (4.6) |
| Duty Cycle Rating | 100% @ 185 A |
| Welding Current Range (amps) | 30–270 |
What's Included
Includes voltmeter to indicate OCV or arc voltage
Includes cylinder rack, MIG torch with 10' cable, 15' feeder cable and 20' power input cable
Features
- Snap-on® MIG Welders have higher-duty cycles at maximum amperage, providing added weld times and performance that surpasses the competition
- Welds up to 3/8'' in a single pass
- Exact voltage settings for precise heat control and ease of use
- Ability to add a spool gun for aluminum welding or TIG accessory pack for ferrous metals
- Wire feed assembly is constructed of precision machined cast aluminum and features all-metal gearing and 800 inches per minute (ipm) delivery for consistent wire speeds
- Capacitor bank and diode set delivers consistent voltage and industry-leading smooth-arc characteristics
- All copper-wound transformer features Nomex® insulation and bolted laminations provide precise voltage control and repeatable welds
- Two-year warranty (except MIG torch and consumables)
- Technical Support: 1-800-ABC-WELD
Inquiry - SNAP-ON 270 A Muscle MIG Wire Feed Welder / Model: MM250SL
