SNAP-ON 12 V Digital Display Circuit Tester with USB Plug / Model: EECT402USB
SNAP-ON 12 V Digital Display Circuit Tester with USB Plug / Model: EECT402USB

Share:


SNAP-ON 12 V Digital Display Circuit Tester with USB Plug / Model: EECT402USB

Contact Us

Quantity:

Voltage 6 & 12 V DC
Operating Temperature 0–120 °F (-18–49 °C)
Replacement Cord Assembly EECTCORD402USB
Replacement LED and Spring Assembly EECT402USB-LCD
Computer Safe Yes, <10 mA (Do not use on airbags)
Replacement Clip NA (USB Plug included on replacement cord)
Red LED Power Connection Indicator
Handle Size/Color Medium Instinct®/Clear
Terminal End USB Plug (EECT402USB-1, 12 V CLA adaptor included)
Polarity Bi-Directional with Color LED, Red and Green indicators
Green LED Ground Connection Indicator
Cord Type Coiled Flexible Rubber
Country Of Origin KOR
Warranty 1 Year (field repairable)
Surge Protected Surge and high DC voltage
Resolution 0.1 V DC
Accuracy ±0.3 Volt
Outside Wire Diameter, inches (mm) .3 (7.6)
Cord Color Black
Weight, lb (kg) 0.5 (0.22)
Overall Handle and Shank Length, inches (cm) 8-1/4 (20.9)
Range 0–19.9 V DC
Stainless Steel Shank Length, inches (cm) 3-1/2 (8.9)
Cord Length, ft (m) – gauge 13 (3.6) – 18
Display LCD w/Backlight

Features
  • Detects DC voltage on newer autos, trucks, motorcycles and more with a USB port
  • 0-19.9 V DC range
  • USB plug allows measurement of DC voltage, ground and open circuits without changing polarity
  • No clamp connection to vehicle battery for quicker diagnosis
  • Backlit daylight readable LCD digital display has LED illumination in green for ground or red for power
  • Leaves one hand free to jiggle a wire, replace a fuse or operate a switch
  • 3-1/2'' stainless steel corrosion free shank
  • Patented Instinct® clear handle for visibility, style and comfort
  • Traditional 12 V CLA adaptor is included for older vehicles (EECT402USB-1)
  • 18 Gauge coil cord stretches to 13'
  • START: Insert the plug end into the vehicles USB port
  • OPEN: White backlight will turn on, the red and green LED’s flash, display will read 0.0 V—red and green lights continue to flash until a good ground or voltage reading at the tip is found
  • POWER: Touch the probe to a terminal, wire or switch, the Red LED illuminates and the LCD will display the measured circuit voltage
  • GROUND: Touch the probe to a terminal, wire or chassis, the Green LED illuminates and the LCD will display “gnd.v” for an acceptable ground or a reading for an unacceptable ground
  • Technical Support 888-382-6522


 Inquiry - SNAP-ON 12 V Digital Display Circuit Tester with USB Plug / Model: EECT402USB

Only .JPG, .PNG, .JPEG & PDF Files
 
Visit our web portal to view/download product literature/catalogue for full range of industrial products:
www.alliance-supplies.com