Share:
SNAP-ON OBD-II Breakout Box, 12 V (Blue-Point) / Model: EECTBOB
Contact Us
Category: OBD-II Breakout Boxes
Quantity:
| Pin Output Sockets | 16 outputs x 1.0 mm diameter with LED lamp indications |
| Operating Temperature | 32–122 °F (0–50 °C) |
| Volt Displays | 3 Digit LED? 0.1 V Resolution |
| Country Of Origin | CHN |
| Permitted Humidity | < 70% |
| Protocols Detected | PWM (J1850), VPW (J1850), ISO 9141-2, DIS/ISO 14230-4, Canbus (J-2284) |
| OBD Cable Length, inches (mm) | 30 (762) |
| Protection | Overload - PTC fuse (Self-healing), Reverse Polarity protection |
| Operating Voltage | Input: 7.0–30.0 V DC |
| Maximum Load | 3.0 Amps Output |
Features
- Test the vehicle diagnostic link connector DLC for abnormalities such as shorting or reverse polarity at the pins
- Provides quick access to all 16 pin terminals during vehicle diagnosis and repair, eliminates guessing which terminals are being probed
- Displays live Voltage readings when testing pins
- Convenient DLC light illuminates the DLC connector to aid in locating the vehicle’s OBD-II port
- Once plugged into the vehicle’s OBD-II port, the unit will check the pins for present voltage—respective LEDs will illuminate with specific colors, pulse or be solid, to identify communication or error (See user manual for details)
- Default pin display is set to pin 16 with corresponding actual battery voltage detected from the DLC
- No need to crawl under the dash, attempting to probe what you can’t see
- Compatible with 12 V systems
- Use independently or diagnose further with a customer owned multi-meter and the positive and negative pin adaptors included
- Works in-line with the vehicle’s DLC and scan tool (sold separately)
- Monitors vehicle voltage during module programming with a low voltage alarm
- Eliminates damage to vehicle terminals from probing
Inquiry - SNAP-ON OBD-II Breakout Box, 12 V (Blue-Point) / Model: EECTBOB
