Share:
SNAP-ON Basic Multimeter Daylight CERT / Model: EEDM504FCRT
Contact Us
Category: Automotive Digital Multimeters
Quantity:
| Capacitance | Yes |
| RPM | EEDMRPMG (opt.) |
| Low Pass Filter (LPF) | No |
| Case or Zipper Pouch | EEDM504B4 |
| Replacement Fuses | EEDM5O4B1 EEDM504B2 |
| Adjustable Trigger Level | No |
| Temperature | EEDM506C (opt.) |
| AC Volts | 750 |
| Basic DC Accuracy, % | 0.50 |
| Micro Amps | Yes |
| Country Of Origin | KOR |
| Dimensions, inches | 7-3/4 x 3-3/4 x 1-1/2 |
| Noise Reduction Circuit | No |
| mS Pulse Width | No |
| CAT Rating | CATII 750 V AC, CATII 1,000 V DC, CATIII 600 V AC/DC |
| Backlight | No |
| Auto Shut-off | Yes |
| Test Leads | EEDM504B3 |
| Certificate of Calibration Model | EEDM504DCRT†|
| DC Amps | 10 |
| UL® Listed | cULus 61010-1 |
| Glitch Capture | No |
| Insulation Test | No |
| Analog Bar Graph | Yes |
| Resistance, ohms | 40M |
| Data Hold | Yes |
| Auto Range | Yes |
| Duty/Dwell | Duty Only |
| True RMS (Root Mean Square) | No |
| AC Amps | 10 |
| Display Count | 4,000 |
| Blown Fuse Identifier | Yes |
| Comp. Output (USB) | No |
| Min/Max | Yes |
| DC Volts | 1,000 |
| Easy Open Battery and Fuse Door | Yes |
| Color Screen | No |
| Frequency | Yes |
Features
- LCD Display - 4,000 count with 42-segment bar graph
- REC (Record Mode) - Store minimum and maximum readings over a measurement period
- AC/DC—Manually select AC or DC measurement function
- Continuity Buzzer and Diode Test—Toggle between continuity buzzer or diode test on Ohm function
- RANGE—Manually select the appropriate range
- LCD Display—4,000 count with 42 segment bar graph
- Continuity Buzzer and Diode Test—Toggle between continuity buzzer or diode test on ohm function
- HIGH RESOLUTION DCmV RANGE—Additional 40 millivolt range with 0.01mV resolution for improved accuracy when performing low voltage measurements
- ACV (AC Volts)—Measure the voltage of ABS wheel sensors
- DCV (DC Volts)—Measure the voltage of circuits and sensors
- Hz/Duty (Duty Cycle)—Measure in percent the ON time of sensors or other devices
- REL (Relative Mode)—Factor out lead resistance for improved low ohm measurements or compare readings to a known standard. Can also be used for differential measurements
- HOLD—Lock the reading on the display for hard to read locations for future reference
- OHMS/RESISTANCE—Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring
- AC/DC Current Functions (Amps)—Measure the parasitic draw from the battery with ignition off
- Hz (FREQUENCY)—Measure the frequency of sensors and signals
- CAP (Capacitance)—Measure the capacitance of condensers or capacitors found in today's hybrid automobiles
- TILT STAND—Is built into the instrument housing
- SEPARATE FUSE/BATTERY COMPARTMENT—Is easily removed for battery/fuse replacement
- Fuses are labeled with replacement number
- Seven-year limited warranty
- Technical and Service Hot Line: 1-888-382-6522
- Manually select AC or DC measurement function
- AC/DC Current functions: measure the parasitic draw from the battery with ignition off
Inquiry - SNAP-ON Basic Multimeter Daylight CERT / Model: EEDM504FCRT
