SNAP-ON Digital Hybrid Multimeter (Certificate Of Calibration) / Model: EEDM604ECRT

Share:


SNAP-ON Digital Hybrid Multimeter (Certificate Of Calibration) / Model: EEDM604ECRT

Contact Us

Quantity:

Capacitance Yes
RPM EEDMRPMG (opt.)
Low Pass Filter (LPF) No
Case or Zipper Pouch EEDM650CPB
Replacement Fuses EEDM604C1 EEDM604C2
Adjustable Trigger Level No
Temperature EEDMTEMP-1
AC Volts 1,000
Basic DC Accuracy, % 0.05
Micro Amps Yes
Country Of Origin KOR
Dimensions, inches 3-13/16 x 8 x 2-13/32
Noise Reduction Circuit No
mS Pulse Width Yes
CAT Rating CATIII 1,000 V CAT IV 600 V
Backlight Yes
Auto Shut-off Yes
Certificate of Calibration Model EEDM604ECRT
DC Amps 10
UL® Listed cULus 61010-1
Glitch Capture Yes
Insulation Test No
Analog Bar Graph Yes
Resistance, ohms (plus conductance)
Data Hold Yes
Auto Range Yes
Duty/Dwell Yes/Duty
True RMS (Root Mean Square) Yes
AC Amps 10
Display Count 50,000
Blown Fuse Identifier Yes
Comp. Output (USB) No
Min/Max Yes
DC Volts 1,000
Easy Open Battery and Fuse Door EEDM650C-6
Color Screen Yes
Frequency Yes

Features
  • Color VA Type LCD Display - 50,000 count with 51 segment bar graph
  • Triple Display - activated with REC, REL, PEAK-H buttons
  • REC (Record Mode) - store minimum, maximum and average readings over a measurement period
  • RANGE - manual range option for each function
  • PEAK-H - peak hold button engages .25 millisecond rapid signal capture function to catch glitches
  • COMP (Compare) - activates the compare function to compare your reading against a known standard
  • REL% (Relative Percent Mode) - factor out lead resistance for improved low ohm measurements or compare readings to a known standard - can also be used for differential measurements
  • EDIT - use in conjunction with the COMP and arrow buttons to set the standard value for comparing readings
  • Gray Button - use to select gray functions noted on meter
  • HOLD - lock the reading on the display for hard to read locations for future reference
  • Ohms, Conductance, Continuity - toggle between measuring resistance, conductance and continuity buzzer
  • ACmV/ DCmV(AC or DC millivolts) - measure up to 500 AC or DC millivolts
  • ADP (Adaptor mode) - direct readout on the LCD when using optional accessories
  • DCV (DC Volts) - measure up to 1,000 V
  • ACV/Hz (AC Volts and Frequency) - measure up to 1,000 V AC - Push the grey button to view frequency, duty, and mS pulse width of the signal
  • Diode Test - test for good, open, or shorted diodes in circuits
  • CAP (Capacitance) - measure the capacitance of condensers and capacitors
  • Hz (Frequency) - measure the frequency, duty and pulse width of sensors and signals. Also used to measure temperature (gray button)
  • AC/DC Current Functions (Amps) - measure the parasitic draw from the battery with ignition off
  • External Testing of Internal Fuses - you can determine the status of the internal fuses before you open the battery/fuse compartment
  • Protective boot and built-in tilt stand
  • Technical Support 888-382-6522


 Inquiry - SNAP-ON Digital Hybrid Multimeter (Certificate Of Calibration) / Model: EEDM604ECRT

Only .JPG, .PNG, .JPEG & PDF Files
 
Visit our web portal to view/download product literature/catalogue for full range of industrial products:
www.alliance-supplies.com