SNAP-ON Enhanced Multimeter Color-CERT / Model: EEDM525FCRT
SNAP-ON Enhanced Multimeter Color-CERT / Model: EEDM525FCRT

Share:


SNAP-ON Enhanced Multimeter Color-CERT / Model: EEDM525FCRT

Contact Us

Quantity:

Country Of Origin KOR

Features
  • Measures ohms, AC/DC volts, true-RMS AC, AC/DC amps, Hz frequency, capacitance and more to cover most automotive electrical needs
  • Larger 4'' color display for easy reading and quick identification of symbol
  • (note: The tradeoff for the large color display- unit is not recommended for use in sunlight)
  • CAT-III 1,000 V AC and CAT-IV 600 V AC hybrid safety ratings mean its safe to use on hybrids
  • Convenient test lead storage wrap with retention strap
  • Built-in tilt stand and optional strap hanger (EEDMMAGSTRAP) for easy viewing
  • Button Functions: Auto or manual range, record mode, hold/lock, duty cycle, low pass filter and second functions
  • 7-year warranty
  • COLOR LCD 4,000 count, 41 segment bar graph
  • Record mode stores min/max readings
  • Ability to manually select range or allow auto ranging
  • Select continuity buzzer or diode test (displays yellow)
  • OHMS measures resistance in plug wires, coils, sensors and continuity
  • DC mV 40 mV range w/0.01 mV high-resolution accurate low volt readings
  • DC V Measure up to 1,000 V, test circuits and sensors
  • TRUE RMS (AC) Root Mean Squared vs avg rectified, use for ABS wheel sensors
  • Hz/ DUTY CYLE Measure in percentage the on time of sensors
  • REL Relative mode factors out lead resistance for improved low-ohm measures or differential
  • HOLD Lock the reading in hard to reach location for later reference
  • LPF Activate Low Pass Filter to reduce AC noise
  • AC/DC Current Measure parasitic draw from battery with ignition off
  • Hz Frequency Measure the frequency of sensors and signals
  • CAP Measure the capacitance of condensers or capacitors
  • TEMP With *optional EEDMTEMP-1 K-type adapter measure °F and °C

Internal Fuse Test:
  • Before you call the 800 number
  • Set unit to diode test with FUNCTION button
  • Plug the black test lead into red “VΩ” input
  • Touch the prod end of black lead red “A” input
  • If the meter reads “OL” fuse is blown, replace
  • If there is a reading other than “OL” fuse is OK
  • Technical Support: 888-382-6522


 Inquiry - SNAP-ON Enhanced Multimeter Color-CERT / Model: EEDM525FCRT

Only .JPG, .PNG, .JPEG & PDF Files
 
Visit our web portal to view/download product literature/catalogue for full range of industrial products:
www.alliance-supplies.com