Share:
SNAP-ON Traditional Digital Multimeter / Model: EEDM503D
Contact Us
Category: Automotive Digital Multimeters
Quantity:
| Capacitance | No |
| RPM | EEDMRPMG (opt.) |
| Low Pass Filter (LPF) | No |
| Case or Zipper Pouch | EEDM504B4 (opt.) |
| Adjustable Trigger Level | No |
| Temperature | EEDM506C†(opt.) |
| AC Volts | 750 |
| Basic DC Accuracy, % | 0.50 |
| Micro Amps | Yes |
| Country Of Origin | KOR |
| Dimensions, inches | 7-3/4 x 3-3/4 x 1-1/2 |
| Noise Reduction Circuit | No |
| mS Pulse Width | No |
| CAT Rating | CATII 750 V AC, CATII 1,000 V DC, CATIII 600 V AC/DC |
| Backlight | No |
| Auto Shut-off | No |
| Test Leads | EEDM504B3 |
| Certificate of Calibration Model | — |
| DC Amps | 10 |
| UL® Listed | cULus 61010-1 |
| Glitch Capture | No |
| Insulation Test | No |
| Analog Bar Graph | No |
| Resistance, ohms | 20M Ohm |
| Data Hold | Yes |
| Auto Range | No |
| Duty/Dwell | No |
| True RMS (Root Mean Square) | No |
| AC Amps | 10 |
| Display Count | 2,000 |
| Fuses | EEDMFUSE-1, EEDMFUSE-4 |
| Blown Fuse Identifier | Yes |
| Comp. Output (USB) | No |
| Min/Max | No |
| DC Volts | 1,000 |
| Easy Open Battery and Fuse Door | Yes |
| Color Screen | No |
| Frequency | No |
Features
- Large, easy-to-read, 2,000-count LCD display
- Push-button on/off
- Ohm measure function determines coil or spark plug resistance
- Continuity buzzer tests continuity of fuses, fusible links, components and circuits
- Diode test—use the diode function to test the diode pack on a typical alternator
- DC amps—measure DC current to determine the presence of a parasitic load; measures current draw of branch circuits
- Data-H (Data hold)—lock reading on the display in locations where it is difficult to read, or for future reference
- DC volts—Use DC voltage to verify if the proper voltage level is arriving at a sensor of circuit
- AC volts—measure AC voltage signals on digital MAF sensors, wheel speed sensors and vehicle speed sensors
- AC amps—measure the current draw of AC-powered equipment in the shop
- Tilt stand—is built-in into the instrument housing
- Separate fuse/battery compartment—easily removed for battery/fuse replacement. Fuses are labeled with replacement number
Inquiry - SNAP-ON Traditional Digital Multimeter / Model: EEDM503D
