Share:
SNAP-ON Motorized Torque Tester/ Calibrator / Model: TTC2800SYS
Contact Us
Category: Torque Tester
Quantity:
| Units Of Measure | TORQUE: ft-lb, in-lb, in-oz, N•m, dN•m, kg•cm and kg•cm; FORCE: lbf, ozf, N, dN, kp and gf |
| Type | TTC2800SYS Motorized Control System |
| Printer/Computer Serial Output Port | RS232 (True), 300-19.2K Baud |
| Power Supply | 120 VAC ±10%, 50/60 Hz @3.14 A (including motor current). (Includes stepdown transformer for 240 VAC operation.) |
| Country Of Origin | USA |
| Histogram | Lower Set Limit, Upper Set Limit, 10 Divisions |
| Motorized Loader Power Supply | 120 V AC ±10% Hz @ 3.14 A (including motor current); (optional step-down transformer for 240 V AC operation) |
| Motorized Loader Modes | Manual; Auto Dial; Auto Click |
| Loader Control Relays | Two, Normally Open, Form A, Rated 12 DVC @ 1/2 A close contact at 110% CW or CCW or torque/force transducer range |
| Data Storage/Recall | 3,000 Measurements |
| Modes | Track, Peak Hold, First Peak, Power Tool |
| Storage Temperature Range | -20–50 °C (-2–122 °F) |
| Loader Hand Crank | Input torque 8 ft-lb Maximum, Output Torque 2,000 ft-lb Maximum |
| Computer Serial Com Port | RS232 (True), 300–19.2K Baud (Optional) |
| Torque/Force Display | Eight digit, alpha-numeric, super bright red LED, 0.55 inch character height |
| Maximum Range Display | 2-line x 16 character 5 x 8 dot-matrix LCD used for MAX. Transducer range, Units, Calibration, Date/Time, Statistics, Torque/Force or Torque Limits Set, Data Store/Recall, Printer Set Up |
| Statistical Analysis | Max, Min, Range, Mean, SigmaN, Sigma, Cp, Cpk, % Error, -NoGo, +NoGo |
| Accuracy* | ±0.25% of reading at 25 °C (with TTC Transducer calibration) |
| Operating Temperature Range | 10–32 °C (50–90 °F) |
| Capacity, digits [counts] (bit A/D) | 8 [±32,000] (16) |
| Analog Output | +(CW/-(CW) 1.8 V at Transducer Full Range Linearity, ±1% of reading |
| Temperature Drift Percentage | +0.03 °C (+0.017 °F) |
| Humidity | Up to 90% Non-Condensing |
Features
- Front Panel Function Keys: SELECT Torque/Force; MODE, UNIT; ZERO TARE; CALIBRATION; DATE/TIME; SET LOW; STORE DATA; RECALL DATA; STATISTICS; SEND/AUTO SEND; AUTO CLEAR; MANUAL CLEAR; ENTER; VALUE increment; VALUE decrement; DIGIT left; DIGIT right
- Model TTC2800SYS includes: TTC2800 TTC Monitor, Motorized Loader, and Cabinet, TTC400 4-in-1 Transducer Kit (4 in-lb–250 ft-lb), TTC5000-1 4-in-1 Transducer Bracket, TTC12 Transducer Kit (60–600 ft-lb), TTC14 Transducer Kit (200–2,000 ft-lb), TTC5500-1 Extension Arm, 2000-SW WedgeLink Software and 2000-50-3 Download Cable
- NIST® traceable
Inquiry - SNAP-ON Motorized Torque Tester/ Calibrator / Model: TTC2800SYS
