DEFELSKO Certified Polystyrene Blocks / Model: P8

Share:


DEFELSKO Certified Polystyrene Blocks / Model: P8

Contact Us

Quantity:

 
Code Ideal For Approx. Thickness - Block 1 Approx. Thickness - Block 2 Approx. Thickness - Block 3 Approx. Thickness - Block 4 Accuracy
P1

PosiTector 6000 FT, FTS, NTS, FNTS, FTRS

PosiTector 200 D

375 μm
15 mils
2 mm
80 mils
4.5 mm
185 mils
6.5 mm
250 mils

± (2.5 μm + 0.05% of thickness)

± (0.1 mil + 0.05% of thickness)

P2 PosiTector 6000 FHS, FJS, NHS, EOC 2.5 mm
100 mils
6.5 mm
250 mils
13 mm
500 mils
19 mm
750 mils

± (2.5 μm + 0.05% of thickness)

± (0.1 mil + 0.05% of thickness)

P3 PosiTectAor 100 C 375 μm
15 mils
1.5 mm
60 mils
2.5 mm
100 mils
4.5 mm
185 mils

± (2.5 μm + 0.05% of thickness)

± (0.1 mil + 0.05% of thickness)

P4 PosiTector 100 D 1.5 mm
60 mils
2.5 mm
100 mils
4.5 mm
185 mils
6.5 mm
250 mils

± (2.5 μm + 0.05% of thickness)

± (0.1 mil + 0.05% of thickness)

P5 PosiTector 6000 FKS, NKS 1.5 mm
60 mils
2.5 mm
100 mils
6.5 mm
250 mils
12 mm
480 mils

± (2.5 μm + 0.05% of thickness)

± (0.1 mil + 0.05% of thickness)

P6 PosiTector 200 C 375 μm
15 mils
1.5 mm
60 mils
2.5 mm
100 mils
3 mm
125 mils

± (2.5 μm + 0.05% of thickness)

± (0.1 mil + 0.05% of thickness)

P7 PosiTector 6000 FHXS 1.5 mm
60 mils
4.5 mm
185 mils
6.5 mm
250 mils
9.5 mm
375 mils

± (2.5 μm + 0.05% of thickness)

± (0.1 mil + 0.05% of thickness)

P8 PosiTector 6000 FNGS, FLS 13 mm
500 mils
13 mm
500 mils
13 mm
500 mils
19 mm
750 mils

± (2.5 μm + 0.05% of thickness)

± (0.1 mil + 0.05% of thickness)


All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
P1-P7 Blocks: 38 x 70 mm (1.5'' x 2.75'')   P8 Blocks: 76 x 76 mm (3.0'' x 3.0'')

 

Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

  • Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
  • Ideal for use in the calibration lab, in the field or on the factory floor
  • Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
  • Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
  • Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
  • Certified and labeled in both Metric and Imperial units
Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.

 Inquiry - DEFELSKO Certified Polystyrene Blocks / Model: P8

Only .JPG, .PNG, .JPEG & PDF Files
 
Visit our web portal to view/download product literature/catalogue for full range of industrial products:
www.alliance-supplies.com