Defelsko Certified Coated Metal Plates / Model: A3

Share:


Defelsko Certified Coated Metal Plates / Model: A3

Contact Us

Quantity:

Code Ideal For Approx. Thickness- Plate 1 Approx. Thickness - Plate 2 Approx. Thickness - Plate 3 Approx. Thickness - Plate 4 Coating/
Substrate
Accuracy
S1

PosiTector 6000 F, FS, FRS, FN, FNS, FNRS, FXS*, FNDS / PosiTest F & FM

0 75 μm
3 mils
250 μm
10 mils
1500 μm
60 mils
Epoxy on Steel (Ferrous)

± 0.43 μm

± 0.017 mil

S2

PosiTector 6000 F0S, F45S, F90S, F90ES / PosiTest DFT Ferrous & Combo

0 75 μm
3 mils
250 μm
10 mils
1000 μm
40 mils
Epoxy on Steel
(Ferrous)

± 0.43 μm

± 0.017 mil

S3

PosiTest G & G / PosiPen A, B & C

0 15 μm
0.6 mils
40 μm
1.6 mils
100 μm
4 mils
Epoxy on Steel
(Ferrous)

± 0.43 μm

± 0.017 mil

S4 PosiTector 6000 FXS* 0 75 μm
3 mils
1000 μm
40 mils
1900 μm
75 mils
Epoxy on Steel
(Ferrous)

± 0.43 μm

± 0.017 mil

A1 PosiTector 6000 N, NS, NRS, FN, FNS, FNRS, FNDS 0 75 μm
3 mils
250 μm
10 mils
1500 μm
60 mils
Epoxy on Aluminum
(Non-Ferrous)

± 0.43 μm

± 0.017 mil

A2

PosiTector 6000 NAS, N0S, N45S, N90S / PosiTest DFT Combo

0 75 μm
3 mils
250 μm
10 mils
500 μm
20 mils
Epoxy on Aluminum
(Non-Ferrous)

± 0.43 μm

± 0.017 mil

A3 PosiTector 100B, 200200B 75 μm
3 mils
125 μm
5 mils
250 μm
10 mils
500 μm
20 mils
Epoxy on Aluminum
(Non-Ferrous)

± 0.43 μm

± 0.017 mil


*PosiTector FXS probes with  a range of 0-1500 um (0-60 mils) and Serial Numbers <361485 should use the S1 Standard.
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
Plate Diameter: 38 mm (1.5'') Measurement Diameter: 25 mm (1'')

 

Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

  • Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
  • Ideal for use in the calibration lab, in the field or on the factory floor
  • Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
  • Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
  • Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
  • Certified and labeled in both Metric and Imperial units

Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.

 Inquiry - Defelsko Certified Coated Metal Plates / Model: A3

Only .JPG, .PNG, .JPEG & PDF Files
 
Visit our web portal to view/download product literature/catalogue for full range of industrial products:
www.alliance-supplies.com